Submersible Aquarium Water Pump with Built In Filter for Fish Tank

Drop This Aquarium Pump in and It Pulls Debris From Every Direction While Your Fish Stay Calm

Fish waste builds up fast and your tank starts looking more like a swamp than a home for your fish. You’re digging around in there by hand while the water stays murky no matter how many times you clean it. Drop this in before guests come over, run it overnight, or let it work while you’re too tied up to deal with it yourself.

Set the pump on the tank floor and it draws water in from every direction around it. It gets going in as little as 2 inches of water and keeps pulling all the way down to half an inch. The magnetic rotor runs all day without making the kind of noise that stresses your fish out.

A ceramic shaft handles both freshwater and saltwater which may help reduce corroding or breaking down over time. The sealed motor cover help blocks fish waste and floating debris from getting into the internal parts. A dry run sensor catches low water levels and cuts the pump off before any damage happens to the motor.

The intake sits right at the base so it catches settled waste and particles that collect along the bottom. A grip handle built into the body lets you lift and reposition it inside the tank without fumbling, the whole thing pulls apart without tools for a quick rinse, and it fits fountains and hydroponic setups just as well.

• OMNIDIRECTIONAL WATER INTAKE: Draws water in from every direction around the pump so debris and waste get pulled in evenly no matter where they settle in the tank.

• WORKS IN SHALLOW WATER: Starts running in as little as 2 inches of water and keeps pulling waste all the way down to half an inch so no part of your tank gets left untouched.

• QUIET MAGNETIC ROTOR: Runs continuously throughout the day without producing the kind of noise that disturbs or stresses your fish during regular operation.

• CERAMIC SHAFT CONSTRUCTION: Resists corrosion in both freshwater and saltwater environments so the internal components hold up through long term daily use without breaking down.

• SEALED MOTOR COVER: Keeps fish waste and floating debris out of the internal parts so the motor stays protected and runs cleanly without buildup interfering.

• DRY RUN PROTECTION SENSOR: Detects low water levels automatically and shuts the pump off before the motor takes any damage so you never have to worry about running it dry.

• BASE LEVEL INTAKE POSITION: Sits right at the tank floor to pull in settled waste and fine particles that collect along the bottom before they cloud up the water.

• BUILT IN GRIP HANDLE: Lets you lift and reposition the pump anywhere inside the tank with a firm hold so you never have to fumble around in the water to move it.

• TOOL FREE DISASSEMBLY: Pulls apart completely by hand in seconds for a quick rinse so keeping it clean never turns into a drawn out maintenance task.

• MULTI SETUP COMPATIBLE: Works in standard aquariums as well as fountains and hydroponic setups so it handles more than just fish tanks around your home.

Product Specifications

• Type: Submersible Aquarium Pump
• Minimum Operating Water Depth: 2 in
• Minimum Draw Depth: 0.5 in
• Rotor Type: Magnetic
• Shaft Material: Ceramic
• Water Compatibility: Freshwater and Saltwater
• Motor Cover: Sealed, Debris Blocking
• Dry Run Protection: Yes, Automatic Sensor Shutoff
• Intake Position: Base Level
• Disassembly: Tool Free
• Compatible Uses: Aquariums, Fountains, Hydroponic Setups

What’s Included

• 1 x Aquarium Pump
• 2 x Nozzle

Frequently Asked Questions

Will it still work if the water level in my tank gets low?
Yes, it starts operating in as little as 2 inches of water and continues drawing down to half an inch, and the dry run sensor shuts it off automatically if levels drop too low to run safely.

Is it safe to use in a saltwater tank?
Yes, the ceramic shaft help resists corrosion in both freshwater and saltwater so the internal components stay intact and functional through long term use in either environment.

How do I clean it when it gets dirty?
The pump pulls apart completely by hand without any tools so you can disassemble it in seconds, rinse each part under water, and put it back together just as quickly.

Will the noise bother my fish while it runs?
No, the magnetic rotor is designed to operate quietly throughout the day so your fish are not disturbed or stressed by any sound coming from the pump during normal use.